Argitalpenak (19) ITZIAR ADARRAGA USABIAGA argitalpenak

2024

  1. Analytical determination and numerical validation of the shear factor in annular sector cross sections

    Structures, Vol. 62

2021

  1. Applicability of an experimental procedure applied to DCB tests in adhesive joints

    International Journal of Adhesion and Adhesives, Vol. 107

  2. Mode II cohesive law extrapolation procedure of composite bonded joints

    Engineering Fracture Mechanics, Vol. 244

2020

  1. Mode I cohesive law characterization procedure in adhesive joints

    ECCM 2018 - 18th European Conference on Composite Materials

  2. Numerical assessment of an experimental procedure applied to DCB tests

    Polymer Testing, Vol. 82

  3. Numerical assessment of the analytical models used to determine flexural and shear moduli in I-Beams when the tensile and compressive moduli are different

    Polymer Testing, Vol. 81

2018

  1. Comparison between the stiffness method and the hybrid method applied to a circular ring

    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 40, Núm. 2

2016

  1. Application of the dual integrated force method to the analysis of the off-axis three-point flexure test of unidirectional composites

    Journal of Composite Materials, Vol. 50, Núm. 3, pp. 413-426

  2. New correction terms concerning three-point and four-point bending tests

    Polymer Testing, Vol. 55, pp. 25-37

2015

  1. Modelling and testing of the snap-through process of bi-stable cross-ply composites

    Composite Structures, Vol. 120, pp. 41-52

  2. Modelling and testing of the snap-through process of cross-ply composites

    ICCM International Conferences on Composite Materials

2014

  1. A top-down analysis for determining edge stresses in composite laminates

    16th European Conference on Composite Materials, ECCM 2014

  2. Modelling of [0/90] laminates subject to thermal effects considering mechanical curvature and through-the-thickness strain

    16th European Conference on Composite Materials, ECCM 2014

  3. Modelling of [0/90] laminates subject to thermal effects considering mechanical curvature and through-the-thickness strain

    Composite Structures, Vol. 110, Núm. 1, pp. 77-87

  4. The dual integrated force method applied to unidirectional composites

    International Journal for Numerical Methods in Engineering, Vol. 98, Núm. 9, pp. 663-677

2013

  1. A top-down analytic approach for the analysis of edge effects of angle-ply symmetric laminates

    Composite Structures, Vol. 104, pp. 60-70

  2. Application of the submodeling technique to the analysis of the edge effects of composite laminates

    Journal of Reinforced Plastics and Composites, Vol. 32, Núm. 15, pp. 1099-1111

2012

  1. Hygrothermal effects in composites: Influence of geometry and determination of transverse coefficient of thermal expansion

    Journal of Reinforced Plastics and Composites, Vol. 31, Núm. 19, pp. 1270-1281

2011

  1. Numerical analysis of displacement and stress fields of off-axis composites in three-point flexure

    Journal of Composite Materials, Vol. 45, Núm. 6, pp. 671-682