Publicaciones (57) Publicaciones de OCTAVIO MANUEL PEREIRA NETO

2024

  1. A Cleaner Milling Process Replacing Emulsion Coolant by Cryogenics CO2

    International Journal of Precision Engineering and Manufacturing - Green Technology, Vol. 11, Núm. 1, pp. 21-32

  2. Adaptive edge finishing process on distorted features through robot-assisted computer vision

    Journal of Manufacturing Systems, Vol. 74, pp. 41-54

  3. Influence of the cutting-edge preparation in ceramic tools for grooving of Inconel® 718 and force prediction

    Engineering Science and Technology, an International Journal, Vol. 54

  4. Surface roughness evaluation when brushing heat-resistant alloy components

    International Journal of Advanced Manufacturing Technology

2023

  1. ANALYSIS OF THE INCLINATION OF SLOTS IN TEXTURED CERAMIC TOOLS THROUGH THE STUDY OF THE FINAL ROUGHNESS AND CUTTING FORCES DURING CUTTING OF COLD WORK TOOL STEEL

    MM Science Journal, Vol. 2023-November, pp. 6901-6908

  2. Axial-compliant tools for adaptive chamfering of sharp-edges: Characterisation and modelling

    Engineering Science and Technology, an International Journal, Vol. 41

  3. Closed-loop chamfer measurement and control for automated robotic deburring processes

    European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023

  4. Edge finishing of large turbine casings using defined multi-edge and abrasive tools in automated cells

    International Journal of Advanced Manufacturing Technology, Vol. 124, Núm. 9, pp. 3149-3159

  5. Influencia del ángulo de posición en el diseño del rompevirutas:: Estudio de herramientas de torneado dinámico y de alto avance en inconel® 718

    Revista DYNA, Vol. 98, Núm. 4, pp. 406-412

  6. On the effects of cutting-edge angle on high-feed turning of Inconel 718© superalloy

    International Journal of Advanced Manufacturing Technology, Vol. 125, Núm. 9-10, pp. 4237-4252

  7. Prediction of cutting forces including tool wear in high-feed turning of Nimonic® C-263 superalloy: A geometric distortion-based model

    Measurement: Journal of the International Measurement Confederation, Vol. 211

  8. TITANIUM BLADE MILLING WITH MINIMUM PIECE DEFORMATION BASED ON TOOL ORIENTATION

    MM Science Journal, Vol. 2023-November 2023, pp. 6961-6967

  9. The Effects of Lubricooling Ecosustainable Techniques on Tool Wear in Carbon Steel Milling

    Materials, Vol. 16, Núm. 7

  10. Threading holder based on axial metal cylinder pins to reduce tap risk during reversion instant

    Alexandria Engineering Journal, Vol. 66, pp. 845-859

2022

  1. Comparison of dry and liquid carbon dioxide cutting conditions based on machining performance and life cycle assessment for end milling GFRP

    International Journal of Advanced Manufacturing Technology

  2. Simulation of Cryo-cooling to Improve Super Alloys Cutting Tools

    International Journal of Precision Engineering and Manufacturing - Green Technology, Vol. 9, Núm. 1, pp. 73-82

2021

  1. A reliable clean process for five-axis milling of knee prostheses

    International Journal of Advanced Manufacturing Technology, Vol. 115, Núm. 5-6, pp. 1605-1620

  2. Design, Manufacturing and Validation of Chip Breakers in Ceramic Inserts for the Machining of Aeronautic Nickel-Based Superalloys Inconel

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

  3. Drilling of CFRP-Ti6Al4V stacks using CO2-cryogenic cooling

    Journal of Manufacturing Processes, Vol. 64, pp. 58-66

  4. Effects of laser-textured on rake face in turning PCD tools for Ti6Al4V

    Journal of Materials Research and Technology, Vol. 15, pp. 177-188