Publicaciones en las que colabora con IÑAKI BIXINTXO MONDRAGON EGAÑA (46)

2014

  1. Effect of poly(ethylene oxide) homopolymer and two different poly(ethylene oxide-b-poly(propylene oxide)-b-poly(ethylene oxide) triblock copolymers on morphological, optical, and mechanical properties of nanostructured unsaturated polyester

    ACS Applied Materials and Interfaces, Vol. 6, Núm. 2, pp. 1073-1081

2013

  1. Cellulose nanocrystals/polyurethane nanocomposites. Study from the viewpoint of microphase separated structure

    Carbohydrate Polymers, Vol. 92, Núm. 1, pp. 751-757

  2. Chemical and morphological characterization of sulfonated polystyrene brushes in different environments

    European Polymer Journal

  3. Effect of H12MDI isomer composition on mechanical and physico-chemical properties of polyurethanes based on amorphous and semicrystalline soft segments

    Polymer Bulletin, Vol. 70, Núm. 8, pp. 2193-2210

  4. Green chemistry for the synthesis of methacrylate-based hydrogels crosslinked through Diels-Alder reaction This paper is dedicated to the fond memory of Professor Iñaki Mondragon, founder of "materials + Technologies" Group (GMT) in 1988, who passed away recently after his contribution to this work

    European Polymer Journal, Vol. 49, Núm. 12, pp. 3998-4007

  5. In situ polymerization and characterization of elastomeric polyurethane-cellulose nanocrystal nanocomposites. Cell response evaluation

    Cellulose, Vol. 20, Núm. 4, pp. 1819-1828

  6. Morphology response by solvent and vapour annealing using polystyrene/poly(methyl methacrylate) brushes

    Thin Solid Films, Vol. 539, pp. 201-206

  7. Poly(urea)urethanes based on amorphous quaternizable hard segments and a crystalline polyol derived from castor oil

    Colloid and Polymer Science, Vol. 291, Núm. 5, pp. 1247-1254

  8. Synthesis and incorporation of dodecanethiol capped silver nanoparticles into poly(styrene-b-isoprene-b-styrene) block copolymer and their influence in the morphology

    Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 436, pp. 170-177

  9. Thermoplastic polyurethanes from renewable resources: Effect of soft segment chemical structure and molecular weight on morphology and final properties

    Polymer International, Vol. 62, Núm. 1, pp. 106-115

2012

  1. Molecular engineering of elastic and strong supertough polyurethanes

    Macromolecules, Vol. 45, Núm. 8, pp. 3436-3443

  2. Shape memory polyurethanes based on polyols derived from renewable resources

    Macromolecular Symposia

  3. Study of the mechanical, electrical and morphological properties of PU/MWCNT composites obtained by two different processing routes

    Composites Science and Technology, Vol. 72, Núm. 2, pp. 235-242

2011

  1. Effect of diisocyanate structure on the properties and microstructure of polyurethanes based on polyols derived from renewable resources

    Journal of Applied Polymer Science

  2. Influence of hard segment content and nature on polyurethane/multiwalled carbon nanotube composites

    Composites Science and Technology, Vol. 71, Núm. 8, pp. 1030-1038

  3. Isocyanate-rich cellulose nanocrystals and their selective insertion in elastomeric polyurethane

    Composites Science and Technology, Vol. 71, Núm. 16, pp. 1953-1960

  4. The role of reactive silicates on the structure/property relationships and cell response evaluation in polyurethane nanocomposites

    Journal of Biomedical Materials Research - Part A, Vol. 97 A, Núm. 4, pp. 480-489

2010

  1. Effect of diisocyanate structure on thermal properties and microstructure of polyurethanes based on polyols derived from renewable resources

    AIP Conference Proceedings

  2. Microstructure and properties of polyurethanes derived from castor oil

    Polymer Degradation and Stability

2009

  1. Accelerator adsorption onto carbon nanotubes surface ffects the vulcanization process of styrene-butadiene rubber composites

    Journal of Applied Polymer Science, Vol. 113, Núm. 5, pp. 2851-2857