Publicaciones en las que colabora con NAGORE GABILONDO LOPEZ (18)

2013

  1. Green chemistry for the synthesis of methacrylate-based hydrogels crosslinked through Diels-Alder reaction This paper is dedicated to the fond memory of Professor Iñaki Mondragon, founder of "materials + Technologies" Group (GMT) in 1988, who passed away recently after his contribution to this work

    European Polymer Journal, Vol. 49, Núm. 12, pp. 3998-4007

2011

  1. Property tailoring of phenol-formaldehyde matrices by control of reactant molar ratio and thermoplastic modification

    Polymer International, Vol. 60, Núm. 5, pp. 851-858

2010

  1. Bacterial cellulose films with controlled microstructure-mechanical property relationships

    Cellulose, Vol. 17, Núm. 3, pp. 661-669

2009

  1. Isoconversional kinetic analysis of resol-clay nanocomposites

    Journal of Thermal Analysis and Calorimetry, Vol. 96, Núm. 2, pp. 567-573

2008

  1. Curing characteristics of resol-layered silicate nanocomposites

    Thermochimica Acta, Vol. 467, Núm. 1-2, pp. 73-79

  2. Thermoplastic polyurethane elastomers based on polycarbonate diols with different soft segment molecular weight and chemical structure: Mechanical and thermal properties

    Polymer Engineering and Science, Vol. 48, Núm. 2, pp. 297-306

2007

  1. Curing kinetics of amine and sodium hydroxide catalyzed phenol-formaldehyde resins

    Journal of Thermal Analysis and Calorimetry, Vol. 90, Núm. 1, pp. 229-236

  2. Synthesis and characterization of resol-layered silicate nanocomposites

    Journal of Applied Polymer Science, Vol. 106, Núm. 4, pp. 2800-2807

2006

  1. Polymerization of resole resins with several formaldehyde/phenol molar ratios: Amine catalysts against sodium hydroxide catalysts

    Journal of Applied Polymer Science, Vol. 102, Núm. 3, pp. 2623-2631

  2. Synthesis and characterization of phenolic novolacs modified by chestnut and mimosa tannin extracts

    Journal of Applied Polymer Science, Vol. 100, Núm. 6, pp. 4412-4419

  3. Toward microphase separation in epoxy systems containing PEO-PPO-PEO block copolymers by controlling cure conditions and molar ratios between blocks

    Colloid and Polymer Science, Vol. 284, Núm. 12, pp. 1403-1410

2005

  1. Evaluation of fiber surface treatment and toughening of thermoset matrix on the interfacial behaviour of carbon fiber-reinforced cyanate matrix composites

    Composites Science and Technology, Vol. 65, Núm. 14, pp. 2189-2197

  2. Influence of molecular weight and chemical structure of soft segment in reaction kinetics of polycarbonate diols with 4,4′-diphenylmethane diisocyanate

    European Polymer Journal, Vol. 41, Núm. 12, pp. 3051-3059

  3. Micro- or nanoseparated phases in thermoset blends of an epoxy resin and PEO-PPO-PEO triblock copolymer

    Polymer, Vol. 46, Núm. 18, pp. 7082-7093

2004

  1. Cure kinetics of epoxy systems modified with block copolymers

    Polymer International, Vol. 53, Núm. 10, pp. 1495-1502

  2. Curing of an epoxy resin modified with poly(methylmethacrylate) monitored by simultaneous dielectric/near infrared spectroscopies

    European Polymer Journal

  3. Morphological characterization and mechanical behavior of poly(styrene-co-acrylonitrile)-modified epoxy matrices

    High Performance Polymers, Vol. 16, Núm. 4, pp. 557-568

2002

  1. Polymerization of formaldehyde and phenol at different pressures

    High Performance Polymers, Vol. 14, Núm. 4, pp. 415-423