Ingeniería de Procesos Sostenibles / SUstainable PRocess ENgineering - GIC 21/068
Publicaciones (42) Publicaciones en las que ha participado algún/a investigador/a
2024
-
5-Methoxymethyl furfural production by acid heterogeneous catalytic etherification of 5-hydroxymethyl furfural
Catalysis Today, Vol. 426
-
Application of zeolites for the production of biofuels and furans from hexose sugars in ethanol
Catalysis Today, Vol. 427
-
Effect of Sulphate-Reducing Bacteria Activity on the Performance of Thermally Sprayed Aluminium and Polyurethane Coatings
Crystals, Vol. 14, Núm. 3
-
Enzyme-mimicking of copper-sites in metal-organic frameworks for oxidative degradation of phenolic compounds
Journal of Materials Chemistry A, Vol. 12, Núm. 8, pp. 4555-4571
-
Evaluation of bimetallic Pt–Co and Pt–Ni catalysts in LOHC dehydrogenation
International Journal of Hydrogen Energy, Vol. 51, pp. 243-255
-
Highly active ultralow loading Pt electrodes for hydrogen evolution reaction developed by magnetron sputtering
International Journal of Hydrogen Energy, Vol. 64, pp. 50-57
-
Integral recycling of epoxy based end-of-life fibre reinforced waste towards H2 rich gas generation
Journal of Industrial and Engineering Chemistry, Vol. 129, pp. 665-681
-
Ni–Fe nanoparticles prepared using hydrotalcite precursors enhance the photocatalytic performance of CO2 methanation
International Journal of Hydrogen Energy, Vol. 56, pp. 1435-1445
-
Process design, kinetics, and techno-economic assessment of an integrated liquid phase furfural hydrogenation process
Chemical Engineering Journal, Vol. 480
-
Strategies for Improving Sustainability in the Development of High-Performance Styrenic Block Copolymers by Developing Blends with Cellulose Derivatives
Polymers, Vol. 16, Núm. 6
-
Tuning the Acid Nature of the ZSM-5 Surface for Selective Production of Ethylene from Ethanol at Low Temperatures
Energy and Fuels, Vol. 38, Núm. 5, pp. 4492-4503
-
Valorisation of Sub-Products from Pyrolysis of Carbon Fibre-Reinforced Plastic Waste: Catalytic Recovery of Chemicals from Liquid and Gas Phases
Polymers, Vol. 16, Núm. 5
2023
-
3D printing of a palladium-alumina cermet monolithic catalyst: catalytic evaluation in microwave-assisted cross-coupling reactions
Materials Today Chemistry, Vol. 27
-
A Preliminary Study on the Use of Highly Aromatic Pyrolysis Oils Coming from Plastic Waste as Alternative Liquid Fuels
Materials, Vol. 16, Núm. 18
-
Almacenamiento termoquímico de energía a alta temperatura para centrales solares de concentración, una revisión crítica
Revista DYNA, Vol. 98, Núm. 6, pp. 612-619
-
Assessment of the reaction phase on the oligomerization of 1-butene into solvent range olefins using MFI catalysts
Chemical Engineering Science, Vol. 281
-
Development of High Temperature Water Sorbents Based on Zeolites, Dolomite, Lanthanum Oxide and Coke
Materials, Vol. 16, Núm. 7
-
Development of photocatalytic nanostructured TiO2 and NiO/TiO2 coatings by DC magnetron sputtering for photocatalytic applications
Ceramics International, Vol. 49, Núm. 11, pp. 19309-19317
-
Effect of the physicochemical properties of bimetallic Ni-Cu catalysts for hydrogenation/hydrogenolysis of HMF varying the synthesis method
Sustainable Chemistry for the Environment, Vol. 4
-
Graphene-based versus alumina supports on CO2 methanation using lanthanum-promoted nickel catalysts
Environmental Science and Pollution Research