Publicaciones (129) Publicaciones en las que ha participado algún/a investigador/a

2024

  1. Topology optimization of Shell–Infill structures with enhanced edge-detection and coating thickness control

    Advances in Engineering Software, Vol. 189

2023

  1. Comprehensive efficient vertical and lateral track dynamic model to study the evolution of rail corrugation in sharp curves

    Journal of Sound and Vibration, Vol. 545

  2. Frictional contact analysis in a spherical roller bearing

    Journal of Computational Design and Engineering, Vol. 10, Núm. 1, pp. 139-159

  3. Infill topology optimization of porous structures with discrete variables by the sequential element rejection and admission method

    Engineering Optimization, Vol. 55, Núm. 3, pp. 457-475

  4. Predicting rail corrugation in a real line by means of a fast non-linear vertical and lateral model

    Wear, Vol. 524-525

2022

  1. A NEW FAST NON-LINEAR VERTICAL AND LATERAL MODEL TO PREDICT RAIL CORRUGATION AND ITS APPLICATION TO A REAL LINE

    CM 2022 - 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Conference Proceedings

  2. Addressing topology optimization with overhang constraints for structures subjected to self-weight loads

    Structural and Multidisciplinary Optimization, Vol. 65, Núm. 12

  3. Harea berdeen erabilera morteroen eroankortasun termikoa aldatzeko

    Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 1, pp. 63-74

  4. Mechanical research to optimize parameter selection for PPS material processed by FDM

    Materials and Manufacturing Processes, Vol. 37, Núm. 11, pp. 1332-1338

  5. Simulación numérica de la aplicación de corrientes de inducción al desmontaje eficiente de vías en placa ferroviarias

    Técnica industrial, Núm. 332, pp. 64-72

2021

  1. Approximating the influence coefficients of non-planar elastic solids for conformal contact analysis

    Tribology International, Vol. 154

  2. Diseño óptimo de estructuras porosas para fabricación aditiva con el método “Sequential Element Rejection and Admission” (SERA)

    Revista iberoamericana de ingeniería mecánica, Vol. 25, Núm. 2, pp. 65-73

  3. Estudio de eficiencia del método de integración directa mediante diferencias centrales (DIMCD)

    Revista DYNA, Vol. 96, Núm. 5, pp. 512-519

  4. Identifying elastic constants for pps technical material when designing and printing parts using fdm technology

    Materials, Vol. 14, Núm. 5, pp. 1-19

  5. Lime mud waste from the paper industry as a partial replacement of cement in mortars used on radiant floor heating systems

    Journal of Building Engineering, Vol. 41

  6. On preventing the dripping effect of overhang constraints in topology optimization for additive manufacturing

    Structural and Multidisciplinary Optimization, Vol. 64, Núm. 6, pp. 4065-4078

  7. Thermal and mechanical properties of mortars reinforced with recycled brass fibres

    Construction and Building Materials, Vol. 284

2020

  1. Experimental evaluation of cement mortars with recycled brass fibres from the electrical discharge machining process

    Construction and Building Materials, Vol. 246

  2. Infill optimization with the sequential element rejection and admission method: Porous structures for additive manufacturing

    WIT Transactions on the Built Environment

  3. Optimum dimensional synthesis of planar mechanisms with geometric constraints

    Meccanica, Vol. 55, Núm. 11, pp. 2135-2158