OCTAVIO MANUEL
PEREIRA NETO
Investigador/a en el periodo 2017-2018
Publicaciones en las que colabora con OCTAVIO MANUEL PEREIRA NETO (55)
2024
-
A Cleaner Milling Process Replacing Emulsion Coolant by Cryogenics CO2
International Journal of Precision Engineering and Manufacturing - Green Technology, Vol. 11, Núm. 1, pp. 21-32
-
Adaptive edge finishing process on distorted features through robot-assisted computer vision
Journal of Manufacturing Systems, Vol. 74, pp. 41-54
-
Enhancement of ceramic tool behaviour with textured grooves during machining of Inconel® 718
International Journal of Advanced Manufacturing Technology, Vol. 134, Núm. 5-6, pp. 2955-2968
-
Influence of the cutting-edge preparation in ceramic tools for grooving of Inconel® 718 and force prediction
Engineering Science and Technology, an International Journal, Vol. 54
2023
-
ANALYSIS OF THE INCLINATION OF SLOTS IN TEXTURED CERAMIC TOOLS THROUGH THE STUDY OF THE FINAL ROUGHNESS AND CUTTING FORCES DURING CUTTING OF COLD WORK TOOL STEEL
MM Science Journal, Vol. 2023-November, pp. 6901-6908
-
Axial-compliant tools for adaptive chamfering of sharp-edges: Characterisation and modelling
Engineering Science and Technology, an International Journal, Vol. 41
-
Closed-loop chamfer measurement and control for automated robotic deburring processes
European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023
-
Edge finishing of large turbine casings using defined multi-edge and abrasive tools in automated cells
International Journal of Advanced Manufacturing Technology, Vol. 124, Núm. 9, pp. 3149-3159
-
Influencia del ángulo de posición en el diseño del rompevirutas:: Estudio de herramientas de torneado dinámico y de alto avance en inconel® 718
Revista DYNA, Vol. 98, Núm. 4, pp. 406-412
-
On the effects of cutting-edge angle on high-feed turning of Inconel 718© superalloy
International Journal of Advanced Manufacturing Technology, Vol. 125, Núm. 9-10, pp. 4237-4252
-
Prediction of cutting forces including tool wear in high-feed turning of Nimonic® C-263 superalloy: A geometric distortion-based model
Measurement: Journal of the International Measurement Confederation, Vol. 211
-
TITANIUM BLADE MILLING WITH MINIMUM PIECE DEFORMATION BASED ON TOOL ORIENTATION
MM Science Journal, Vol. 2023-November 2023, pp. 6961-6967
-
The Effects of Lubricooling Ecosustainable Techniques on Tool Wear in Carbon Steel Milling
Materials, Vol. 16, Núm. 7
-
Threading holder based on axial metal cylinder pins to reduce tap risk during reversion instant
Alexandria Engineering Journal, Vol. 66, pp. 845-859
2022
-
Comparison of dry and liquid carbon dioxide cutting conditions based on machining performance and life cycle assessment for end milling GFRP
International Journal of Advanced Manufacturing Technology, Vol. 122, Núm. 2, pp. 821-833
-
Simulation of Cryo-cooling to Improve Super Alloys Cutting Tools
International Journal of Precision Engineering and Manufacturing - Green Technology, Vol. 9, Núm. 1, pp. 73-82
2021
-
A reliable clean process for five-axis milling of knee prostheses
International Journal of Advanced Manufacturing Technology, Vol. 115, Núm. 5-6, pp. 1605-1620
-
Design, Manufacturing and Validation of Chip Breakers in Ceramic Inserts for the Machining of Aeronautic Nickel-Based Superalloys Inconel
Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25
-
Drilling of CFRP-Ti6Al4V stacks using CO2-cryogenic cooling
Journal of Manufacturing Processes, Vol. 64, pp. 58-66
-
Effects of laser-textured on rake face in turning PCD tools for Ti6Al4V
Journal of Materials Research and Technology, Vol. 15, pp. 177-188