Publicaciones en las que colabora con Fernando Veiga (29)

2023

  1. Tomography analysis of Al–Mg alloys manufactured by wire-arc directed energy deposition with different metal transfer modes

    Alexandria Engineering Journal, Vol. 82, pp. 168-177

  2. Wear mechanisms of TiN coated tools during high-speed tapping of GGG50 nodular cast iron

    Wear, Vol. 514-515

2022

  1. Influence of Axial Depth of Cut and Tool Position on Surface Quality and Chatter Appearance in Locally Supported Thin Floor Milling

    Materials, Vol. 15, Núm. 3

  2. Modeling of cutting force and final thickness for low stiffness 2024-T3 aluminum alloy part milling considering its geometry and fixtures

    Journal of Materials Research and Technology, Vol. 21, pp. 2416-2427

2021

  1. Characterization of Inconel 718® superalloy fabricated by wire Arc Additive Manufacturing: effect on mechanical properties and machinability

    Journal of Materials Research and Technology, Vol. 14, pp. 2665-2676

  2. Model for the prediction of deformations in the manufacture of thin-walled parts by wire arc additive manufacturing technology

    Metals, Vol. 11, Núm. 5

  3. Predicted torque model in low-frequency-assisted boring (Lfab) operations

    Metals, Vol. 11, Núm. 7

  4. Wire arc additive manufacturing of an aeronautic fitting with different metal alloys: From the design to the part

    Journal of Manufacturing Processes, Vol. 64, pp. 188-197

2020

  1. Analysis of the machining process of titanium Ti6Al-4V parts manufactured by wire arc additive manufacturing (WAAM)

    Materials, Vol. 13, Núm. 3

  2. Analysis of the wall geometry with different strategies for high deposition wire arc additive manufacturing of mild steel

    Metals, Vol. 10, Núm. 7, pp. 1-19

  3. Evaluation on advantages of low frequency assisted drilling (LFAD) aluminium alloy Al7075

    International Journal of Mechatronics and Manufacturing Systems, Vol. 13, Núm. 3, pp. 230-246

  4. Experimental investigation of the influence of wire arc additive manufacturing on the machinability of titanium parts

    Metals, Vol. 10, Núm. 1

  5. High deposition wire arc additive manufacturing of mild steel: Strategies and heat input effect on microstructure and mechanical properties

    Journal of Manufacturing Processes, Vol. 58, pp. 615-626

  6. Influence of heat input on the formation of laves phases and hot cracking in plasma arc welding (PAW) additive manufacturing of inconel 718

    Metals, Vol. 10, Núm. 6, pp. 1-17

  7. Mejora del mecanizado mediante el registro y análisis de variables de proceso en la nube

    Revista DYNA, Vol. 95, Núm. 5, pp. 473-477

  8. Residual stress and distortion modeling on aeronautical aluminum alloy parts for machining sequence optimization

    International Journal of Advanced Manufacturing Technology, Vol. 110, Núm. 5-6, pp. 1219-1232

  9. Threading performance of different coatings for high speed steel tapping

    Coatings, Vol. 10, Núm. 5

  10. Wire arc additive manufacturing Ti6Al4V aeronautical parts using plasma arc welding: Analysis of heat-treatment processes in different atmospheres

    Journal of Materials Research and Technology, Vol. 9, Núm. 6, pp. 15454-15466

2019

  1. An investigation of cutting forces and tool wear in turning of Haynes 282

    Journal of Manufacturing Processes, Vol. 37, pp. 529-540

  2. Analysis of the machining process of inconel 718 parts manufactured by laser metal deposition

    Materials, Vol. 12, Núm. 13