Ingeniería Química y del Medio Ambiente

2010

1. A robust position control for induction machines

   19th International Conference on Electrical Machines, ICEM 2010

2. Butyraldehyde production by butanol oxidation over Ru and Cu catalysts supported on ZrO2, TiO2 and CeO2

   Studies in Surface Science and Catalysis

3. Composition of the products obtained in the cracking of a mixture of atmospheric residue and vacuum gas-oil

   19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7

4. Density, refractive index, speed of sound at 298.15 K, and vapor-liquid equilibrium at 101.3 kPa for binary mixtures of methanol + ethyl lactate and 1-propanol + ethyl lactate

   Journal of Chemical and Engineering Data

5. Development of a simultaneous adsorptionozonation process for the removal of phenol in wastewaters

   19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7

6. Diseño de producto aplicado al pretratamiento de aditivos en la industria agroalimentaria

   Comunicaciones presentadas al XIV Congreso Internacional de Ingeniería de Proyectos: Madrid 30 de junio, 1 y 2 de julio de 2010

7. Effect of diisocyanate structure on thermal properties and microstructure of polyurethanes based on polyols derived from renewable resources

   AIP Conference Proceedings

8. Energy and exergy analysis of biorefinery processes

   Proceedings of the 23rd International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems, ECOS 2010

9. Energy optimization of a network of exchangers-reactors in a nitric acid production plant

   Chemical Engineering Transactions

10. Glycerol conversion into H2 by steam reforming over Ni and PtNi catalysts supported on MgO modified γ-Al2O3

    Studies in Surface Science and Catalysis

11. Glycerol upgrading by catalytic cracking on zeolite catalysts under FCC conditions

    19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7

12. Improving the learning process through problem based learning (PBL) in materials engineering technology

    Edulearn 10. International conference on Education and New Learning Technology (Barcelona, 5-7 de julio de 2010)

13. Indicadores de la sostenibilidad de las infraestructuras

    Comunicaciones presentadas al XIV Congreso Internacional de Ingeniería de Proyectos: Madrid 30 de junio, 1 y 2 de julio de 2010

14. Intensifying the yield of gasoline and diesel during the hydrocracking of light cycle oil (LCO) on Pt-Pd/acid-support catalyst

    19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7

15. Lignocellulosic biorefinery approach: A challenge for a new world

    Chemical Engineering Transactions

16. Lignocellulosic biorefinery approach: A challenge for a new world

    19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7

17. Lignocellulosic biorefinery processes energy integration

    Chemical Engineering Transactions

18. Lignocellulosic biorefinery processes energy integration

    19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7

19. Microstructure and properties of polyurethanes derived from castor oil

    Polymer Degradation and Stability

20. NEW METHODOLOGIES AND STRATEGIES IN THE SUBJECT OF EXPERIMENTATION IN CHEMISTRY I

    EDULEARN10: INTERNATIONAL CONFERENCE ON EDUCATION AND NEW LEARNING TECHNOLOGIES