Artículos (38) Publicaciones en las que ha participado algún/a investigador/a

2006

  1. Active faulting offshore SE Spain (Alboran Sea): Implications for earthquake hazard assessment in the Southern Iberian Margin

    Earth and Planetary Science Letters, Vol. 241, Núm. 3-4, pp. 734-749

  2. CO oxidation over gold-supported catalysts-coated ceramic foams prepared from stainless steel wastes

    Applied Catalysis A: General, Vol. 302, Núm. 1, pp. 96-103

  3. Changes in solution color during phenol oxidation by fenton reagent

    Environmental Science and Technology, Vol. 40, Núm. 17, pp. 5538-5543

  4. Crystallization of poly(L-lactid acid) monitored by dielectric relaxation spectroscopy and atomic force microscopy

    Journal of Microscopy, Vol. 224, Núm. 3, pp. 277-289

  5. Curing of an epoxy resin modified with nanoclay monitored by dielectric spectroscopy and rheological measurements

    Journal of Applied Polymer Science, Vol. 102, Núm. 6, pp. 5927-5933

  6. Curing of phenolic resins modified with chestnut tannin extract

    Journal of Applied Polymer Science, Vol. 101, Núm. 3, pp. 2034-2039

  7. Determination of tensile and compressive moduli by flexural tests

    Polymer Testing, Vol. 25, Núm. 6, pp. 766-771

  8. Effect of the oxidation in the surface magnetic properties of as-quenched and relaxed Finemet alloy

    Journal of Non-Crystalline Solids, Vol. 352, Núm. 42-49 SPEC. ISS., pp. 5118-5121

  9. Effects of hygrothermal ageing on mechanical properties of flax pulps and their polypropylene matrix composites

    Journal of Applied Polymer Science, Vol. 102, Núm. 4, pp. 3438-3445

  10. Evaluación y comparación de dos sistemas de predicción meteorológica en las costas mediterráneas de la Península Ibérica

    Acta de las Jornadas Científicas de la Asociación Meteorológica Española, Núm. 29

  11. Implementation of industrial health and safety in chemical engineering teaching laboratories

    Journal of Chemical Health and Safety, Vol. 13, Núm. 2, pp. 19-23

  12. Influence of PS-b-PEO diblock copolymers on the compatibility of syndiotactic polystyrene modified epoxy blends

    Journal of Applied Polymer Science, Vol. 102, Núm. 1, pp. 479-488

  13. Influencia del tamaño de las partículas sobre la cinética de producción de metano de un residuo de origen porcino

    Tecnología del agua, Año 26, Núm. 268, pp. 33-40

  14. Long term hourly measurement of 62 non-methane hydrocarbons in an urban area: Main results and contribution of non-traffic sources

    Atmospheric Environment, Vol. 40, Núm. 16, pp. 2860-2872

  15. Los contenidos transversales en la enseñanza: ciencia, tecnología y sociedad

    Química e industria: QeI, Núm. 565, pp. 24-28

  16. Mechanical behavior of high impact polystyrene reinforced with short sisal fibers

    Composites Part A: Applied Science and Manufacturing, Vol. 37, Núm. 1, pp. 139-150

  17. Mechanical properties of short flax fibre bundle/poly(ε{lunate}-caprolactone) composites: Influence of matrix modification and fibre content

    Carbohydrate Polymers, Vol. 64, Núm. 2, pp. 224-232

  18. Modified cellulose fibres for adsorption of organic compound in aqueous solution

    Separation and Purification Technology, Vol. 52, Núm. 2, pp. 332-342

  19. Molecular dynamics of poly(glycolide) and poly(glycolide-co-L-lactide) during isothermal cold crystallization

    Journal of Non-Crystalline Solids, Vol. 352, Núm. 42-49 SPEC. ISS., pp. 5087-5092

  20. Nanohole volume dependence on the cure schedule in epoxy thermosetting networks: A PALS study

    Polymer, Vol. 47, Núm. 14, pp. 5066-5070