Ingeniería Química

2012

1. Analysis of the laser weldability under conduction regime of 2024, 5083, 6082 and 7075 aluminium alloys

   Materials Science Forum

2. Application of laser remelting treatments to improve the properties of Ti6Al4V alloy

   Materials Science Forum

3. Application of laser texturization to increase the depth of AA5083 welds

   Advanced Materials Research

4. Coke deactivation of HZSM-5, SAPO-18 and SAPO-34 catalysts in the selective production of propylene from n-butene

   CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

5. Effect of catalyst acidity on the catalytic cracking of glycerol under FCC conditions

   CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

6. Effect of the acidity of the HZSM-5 zeolite catalyst on the catalytic pyrolysis of HDPE in two steps

   CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

7. Hydrogenation of scrap tires oil (STO) on a Pt-Pd/activated-carbon catalyst for clean fuel production

   CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

8. Improvements of laser weldability of aluminum alloys by laser texturization

   AIP Conference Proceedings

9. In deep characterization of coke deposited on Pt-Pd catalysts in the hydrocracking of LCO

   CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

10. Inhibiting effect of water on the deactivation of the metallic function in the syngas to dimethyl ether process

    CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

11. Kinetic model for dimethyl ether synthesis from (H2+CO2) feeds

    CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

12. Laser remelting of Ti6AL4V using high power diode laser

    AIP Conference Proceedings

13. Laser welding of aeronautical and automobile aluminum alloys

    AIP Conference Proceedings

14. Modelling of drying of wet coarse particles of sludge in a conical spouted bed dryer

    Lecture Notes in Engineering and Computer Science

15. Oxygen-enhanced water gas shift over ceria-supported Au-Cu bimetallic catalysts prepared by wet impregnation and deposition-precipitation

    International Journal of Hydrogen Energy

16. Preparation of adsorbents derived from waste tires

    CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

17. Preparation of adsorbents derived from waste tires

    Chemical Engineering Transactions

18. Rice husk fast pyrolysis in a conical spouted bed reactor

    CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

19. Role of ion exchange on HZSM-5 zeolites in the conversion of chloromethane to light olefins

    CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

20. Selective CO oxidation in H 2 streams on CuO/Ce xZr 1-xO 2 catalysts: Correlation between activity and low temperature reducibility

    International Journal of Hydrogen Energy