Departamento
Ingeniería Química
Publicaciones (76) Publicaciones en las que ha participado algún/a investigador/a
2020
-
A comprehensive approach for designing different configurations of isothermal reactors with fast catalyst deactivation
Chemical Engineering Journal, Vol. 379
-
A general heat transfer correlation for flow condensation in single port mini and macro channels using genetic programming
International Journal of Refrigeration, Vol. 119, pp. 376-389
-
A hybrid FCC/HZSM-5 catalyst for the catalytic cracking of a VGO/bio-oil blend in FCC conditions
Catalysts, Vol. 10, Núm. 10, pp. 1-15
-
Adaptable kinetic model for the transient and pseudo-steady states in the hydrodeoxygenation of raw bio-oil
Chemical Engineering Journal, Vol. 400
-
Alternative drying of orange bagasse in vibrofluidized bed for use in combustion
Chemical Engineering and Processing - Process Intensification, Vol. 152
-
Analysis of the effect of the operational conditions in a combined adsorption-ozonation process with granular activated carbon for the treatment of phenol wastewater
Reaction Chemistry and Engineering, Vol. 5, Núm. 4, pp. 760-778
-
Ba-doped vs. Sr-doped LaCoO3 perovskites as base catalyst in diesel exhaust purification
Molecular Catalysis, Vol. 488
-
Bimetallic pt-co catalysts for the liquid-phase wgs
Catalysts, Vol. 10, Núm. 8, pp. 1-21
-
CO2-aren erabilera, berotegi-efektua murrizteko estrategia
Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 37, pp. 257-270
-
Catalytic steam reforming of biomass fast pyrolysis volatiles over Ni–Co bimetallic catalysts
Journal of Industrial and Engineering Chemistry, Vol. 91, pp. 167-181
-
CeO2 and La2O3 promoters in the steam reforming of polyolefinic waste plastic pyrolysis volatiles on Ni-based catalysts
ACS Sustainable Chemistry and Engineering, Vol. 8, Núm. 46, pp. 17307-17321
-
Co-cracking of high-density polyethylene (HDPE) and vacuum gasoil (VGO) under refinery conditions
Chemical Engineering Journal, Vol. 382
-
Coke formation and deactivation during catalytic reforming of biomass and waste pyrolysis products: A review
Renewable and Sustainable Energy Reviews, Vol. 119
-
Comparative analysis of different static mixers performance by CFD technique: An innovative mixer
Chinese Journal of Chemical Engineering, Vol. 28, Núm. 3, pp. 672-684
-
Comparative study of strategies for enhancing the performance of Co3o4/Al2o3 catalysts for lean methane combustion
Catalysts, Vol. 10, Núm. 7, pp. 1-18
-
Contaminants of emerging concern removal in an euent of wastewater treatment plant under biological and continuous mode ultrafiltration treatment
Sustainability (Switzerland), Vol. 12, Núm. 2
-
Converting the Surplus of Low-Quality Naphtha into More Valuable Products by Feeding It to a Fluid Catalytic Cracking Unit
Industrial and Engineering Chemistry Research, Vol. 59, Núm. 38, pp. 16868-16875
-
Deactivation of Ni spinel derived catalyst during the oxidative steam reforming of raw bio-oil
Fuel, Vol. 276
-
Design Factors in Fountain Confined Conical Spouted Beds
Chemical Engineering and Processing - Process Intensification, Vol. 155
-
Design of active sites in Ni/CeO2 catalysts for the methanation of CO2: tailoring the Ni-CeO2 contact
Applied Materials Today, Vol. 19