Ingeniería Química

1993

1. A model for gas flow in jet spouted beds

   The Canadian Journal of Chemical Engineering, Vol. 71, Núm. 2, pp. 189-194

2. Behavior of Highly Dispersed Platinum Catalysts in Liquid-Phase Hydrogenations

   Industrial and Engineering Chemistry Research, Vol. 32, Núm. 6, pp. 1035-1040

3. Biokinetic behavior and settling characteristics in an activated sludge under the effect of toxic Ni(II) influentes

   Water, Air, & Soil Pollution, Vol. 69, Núm. 1-2, pp. 57-68

4. Calculation of the Kinetics of Deactivation by Coke for a Silica-Alumina Catalyst in the Dehydration of 2-Ethylhexanol

   Industrial and Engineering Chemistry Research, Vol. 32, Núm. 3, pp. 458-465

5. Calculation of the kinetics of deactivation by coke in an integral reactor for a triangular scheme reaction

   Chemical Engineering Science, Vol. 48, Núm. 6, pp. 1077-1087

6. Deactivation and Acidity Deterioration of a SiO2/Al2O3 Catalyst in the Isomerization of cis-Butene

   Industrial and Engineering Chemistry Research, Vol. 32, Núm. 4, pp. 588-593

7. Design Factors of Conical Spouted Beds and Jet Spouted Beds

   Industrial and Engineering Chemistry Research, Vol. 32, Núm. 6, pp. 1245-1250

8. Expansion of spouted beds in conical contactors

   The Chemical Engineering Journal, Vol. 51, Núm. 1, pp. 45-52

9. Flue gas desulfurization at low temperatures.Characterization of the structural changes in the solid sorbent

   Powder Technology, Vol. 75, Núm. 2, pp. 167-172

10. Kinetic modelling of sublimation and vaporization in low-temperature dehydration processes

    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, Vol. 26, Núm. 4, pp. 389-394

11. Optimization of Temperature-Time Sequences in Reaction-Regeneration Cycles. Application to the Isomerization of cis-Butene

    Industrial and Engineering Chemistry Research, Vol. 32, Núm. 11, pp. 2542-2547

12. Phenol recovery with SLM using 'CYANEX 923'

    Chemical Engineering Communications, Vol. 120, pp. 85-97

13. Pressure drop in conical spouted beds

    The Chemical Engineering Journal, Vol. 51, Núm. 1, pp. 53-60

14. Promoter Effects on Platinum Catalysts for Automotive Exhaust Control

    Studies in Surface Science and Catalysis, Vol. 75, Núm. C, pp. 2689-2692

15. Reaction-regeneration cycles in the isomerization of cis-butene and calculation of the reactivation kinetics of a silica-alumina catalyst

    Chemical Engineering Science, Vol. 48, Núm. 15, pp. 2741-2752

16. Selective kinetic deactivation model for a triangular reaction scheme

    Chemical Engineering Science, Vol. 48, Núm. 12, pp. 2273-2282

17. Simulation and design of beating profiles in beat controlled freeze-drying or pharmaceuticals in vials by the application of a sublimation cylindrical model

    Drying Technology, Vol. 11, Núm. 1, pp. 85-102

18. Simulation and design of beating profiles in heat controlled freeze-drying of pharmaceuticals in vials by the application of a sublimation semisphsrical model

    Drying Technology, Vol. 11, Núm. 3, pp. 471-487

19. Stability and Hydrodynamics of Conical Spouted Beds with Binary Mixtures

    Industrial and Engineering Chemistry Research, Vol. 32, Núm. 11, pp. 2826-2834

20. Surface Features and Catalytic Performance of Platinum/Alumina Catalysts in Slurry-Phase Hydrogenation

    Industrial and Engineering Chemistry Research, Vol. 32, Núm. 11, pp. 2457-2463