Ingeniería Química

2022

1. 3D printing – Present and future – A Chemical Engineering perspective

   Chemical Engineering Research and Design, Vol. 187, pp. 598-610

2. A model for predicting the performance of a batch fountain confined spouted bed dryer at low and moderate temperatures

   Powder Technology, Vol. 405

3. A review on the valorization of CO2. Focusing on the thermodynamics and catalyst design studies of the direct synthesis of dimethyl ether

   Fuel Processing Technology, Vol. 233

4. A techno-economic and life cycle assessment for the production of green methanol from CO2: catalyst and process bottlenecks

   Journal of Energy Chemistry, Vol. 68, pp. 255-266

5. Activation of n-pentane while prolonging HZSM-5 catalyst lifetime during its combined reaction with methanol or dimethyl ether

   Catalysis Today, Vol. 383, pp. 320-329

6. Activity and stability of different Fe loaded primary catalysts for tar elimination

   Fuel, Vol. 317

7. Aging studies on dual function materials Ru/Ni-Na/Ca-Al2O3for CO2adsorption and hydrogenation to CH4

   Journal of Environmental Chemical Engineering, Vol. 10, Núm. 3

8. Alternative acid catalysts for the stable and selective direct conversion of CO2/CO mixtures into light olefins

   Fuel Processing Technology, Vol. 238

9. An analysis of hydrogen production potential through the in-line oxidative steam reforming of different pyrolysis volatiles

   Journal of Analytical and Applied Pyrolysis, Vol. 163

10. Analysis of hydrogen production potential from waste plastics by pyrolysis and in line oxidative steam reforming

    Fuel Processing Technology, Vol. 225

11. Applicability of LaNiO3-derived catalysts as dual function materials for CO2 capture and in-situ conversion to methane

    Fuel, Vol. 320

12. Aqueous-Phase Glycerol Conversion over Ni-Based Catalysts Synthesized by Nanocasting

    Catalysts, Vol. 12, Núm. 6

13. Aqueous-phase reforming of glycerol over Pt-Co catalyst: Effect of process variables

    Journal of Environmental Chemical Engineering, Vol. 10, Núm. 3

14. Assessment of pressure drop in conical spouted beds of biomass by artificial neural networks and comparison with empirical correlations

    Particuology, Vol. 70, pp. 1-9

15. Bed symmetry in the fountain confined conical spouted beds with open-sided draft tubes

    Powder Technology, Vol. 399

16. Beneficial effects of nickel promoter on the efficiency of alumina-supported Co3O4catalysts for lean methane oxidation

    Journal of Environmental Chemical Engineering, Vol. 10, Núm. 6

17. Binderless ZrO2/HZSM-5 fibrillar composites by electrospinning as catalysts for the dimethyl ether-to-olefins process

    Microporous and Mesoporous Materials, Vol. 342

18. Biochar derived from animal bone waste as an alternative bioadsorbent for an industrial tannery dye removal

    Biomass Conversion and Biorefinery

19. Bulk Co3O4 for Methane Oxidation: Effect of the Synthesis Route on Physico-Chemical Properties and Catalytic Performance

    Catalysts, Vol. 12, Núm. 1

20. Ce-doped cobalt aluminate catalysts for the glycerol hydrodeoxygenation (HDO) with in-situ produced hydrogen

    Journal of Environmental Chemical Engineering, Vol. 10, Núm. 3