Publicaciones (67) Publicaciones en las que ha participado algún/a investigador/a

2017

  1. A comparative thermodynamic study on the CO2 conversion in the synthesis of methanol and of DME

    Energy, Vol. 120, pp. 796-804

  2. A new method to measure fine particle circulation rates in draft tube conical spouted beds

    Powder Technology, Vol. 316, pp. 87-91

  3. An adaptive lumped parameter cascade model for orange juice solid waste drying in spouted bed

    Drying Technology, Vol. 35, Núm. 5, pp. 577-584

  4. Artificial neural network optimization for methyl orange adsorption onto polyaniline nano-adsorbent: Kinetic, isotherm and thermodynamic studies

    Journal of Molecular Liquids, Vol. 244, pp. 189-200

  5. Assessment of a conical spouted with an enhanced fountain bed for biomass gasification

    Fuel, Vol. 203, pp. 825-831

  6. Assessment of thermogravimetric methods for calculating coke combustion-regeneration kinetics of deactivated catalyst

    Chemical Engineering Science, Vol. 171, pp. 459-470

  7. Behavior of CZZr/S catalysts on the direct synthesis of DME from CO2 containing feeds

    Chemical Engineering Transactions, Vol. 57, pp. 949-954

  8. CFD coupled kinetic modeling and simulation of hot wall vertical tubular reactor for deposition of SiC crystal from MTS

    Journal of Crystal Growth, Vol. 475, pp. 97-109

  9. CFD modeling of heat transfer and hydrodynamics in a draft tube conical spouted bed reactor under pyrolysis conditions: Impact of wall boundary condition

    Applied Thermal Engineering, Vol. 127, pp. 224-232

  10. CFD-DEM simulation of a conical spouted bed with open-sided draft tube containing fine particles

    Journal of the Taiwan Institute of Chemical Engineers, Vol. 81, pp. 275-287

  11. CO elimination processes over promoter-free hydroxyapatite supported palladium catalysts

    Applied Catalysis B: Environmental, Vol. 201, pp. 189-201

  12. Catalytic deactivation pathways during the cracking of glycerol and glycerol/VGO blends under FCC unit conditions

    Chemical Engineering Journal, Vol. 307, pp. 955-965

  13. Characterization and controlled combustion of carbonaceous deactivating species deposited on an activated carbon-based catalyst

    Chemical Engineering Journal, Vol. 327, pp. 454-464

  14. Comparison of Ni Based and Rh Based Catalyst Performance in the Oxidative Steam Reforming of Raw Bio-Oil

    Energy and Fuels, Vol. 31, Núm. 7, pp. 7147-7156

  15. Copper-Based Metal–Organic Porous Materials for CO2 Electrocatalytic Reduction to Alcohols

    ChemSusChem, Vol. 10, Núm. 6, pp. 1100-1109

  16. Correlations for calculating peak and spouting pressure drops in conical spouted beds of biomass

    Journal of the Taiwan Institute of Chemical Engineers, Vol. 80, pp. 678-685

  17. Deactivation dynamics of a Ni supported catalyst during the steam reforming of volatiles from waste polyethylene pyrolysis

    Applied Catalysis B: Environmental, Vol. 209, pp. 554-565

  18. Deactivation kinetics for the conversion of dimethyl ether to olefins over a HZSM-5 zeolite catalyst

    Chemical Engineering Journal, Vol. 311, pp. 367-377

  19. EFFECT OF PROMOTER LA(2)O(3) ON NI/AL(2)O(3) CATALYSTS IN THE STEAM REFORMING OF VOLATILES DERIVED FROM BIOMASS PYROLYSIS

    PAPERS OF THE 25TH EUROPEAN BIOMASS CONFERENCE

  20. Ectoine bio-milking in methanotrophs: A step further towards methane-based bio-refineries into high added-value products

    Chemical Engineering Journal, Vol. 328, pp. 44-48