Ingeniería Química

2013

1. A novel conical combustor for thermal exploitation of vineyard pruning wastes

   Fuel, Vol. 110, pp. 178-184

2. Analysis of ion exchange isothermal supersaturation process for struvite production

   Industrial and Engineering Chemistry Research, Vol. 52, Núm. 30, pp. 10276-10283

3. CFD simulation of cylindrical spouted beds by the kinetic theory of granular flow

   Powder Technology, Vol. 246, pp. 303-316

4. Catalysts of Ni/α-Al2O3 and Ni/La 2O3-αAl2O3 for hydrogen production by steam reforming of bio-oil aqueous fraction with pyrolytic lignin retention

   International Journal of Hydrogen Energy, Vol. 38, Núm. 3, pp. 1307-1318

5. Cracking of high density polyethylene pyrolysis waxes on HZSM-5 catalysts of different acidity

   Industrial and Engineering Chemistry Research, Vol. 52, Núm. 31, pp. 10637-10645

6. Cycle time in draft tube conical spouted bed dryer for sludge from paper industry

   Chemical Engineering Science, Vol. 100, pp. 413-420

7. Design and operation of a conical spouted bed reactor pilot plant (25 kg/h) for biomass fast pyrolysis

   Fuel Processing Technology, Vol. 112, pp. 48-56

8. Dimetil eterraren sintesia CuO-ZnO-Al2O3/y-Al2O3 katalizatzaile bifuntzionala erabiliz. Eragiketa-baldintzen eragina

   Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 26, pp. 167-187

9. Effect of combining metallic and acid functions in CZA/HZSM-5 desilicated zeolite catalysts on the DME steam reforming in a fluidized bed

   International Journal of Hydrogen Energy, Vol. 38, Núm. 24, pp. 10019-10028

10. Effect of draft tube geometry on pressure drop in draft tube conical spouted beds

    Canadian Journal of Chemical Engineering, Vol. 91, Núm. 11, pp. 1865-1870

11. Effect of slip boundary conditions on the simulation of microparticle velocity fields in a conical fluidized bed

    AIChE Journal, Vol. 59, Núm. 12, pp. 4502-4518

12. Estado del arte en la oxidación avanzada a efluentes industriales: nuevos desarrollos y futuras tendencias

    Afinidad: Revista de química teórica y aplicada, Vol. 70, Núm. 561, pp. 24-32

13. Evaluation of drag models for predicting the fluidization behavior of silver oxide nanoparticle agglomerates in a fluidized bed

    Industrial and Engineering Chemistry Research, Vol. 52, Núm. 22, pp. 7569-7578

14. Flash pyrolysis of forestry residues from the Portuguese Central Inland Region within the framework of the BioREFINA-Ter project

    Bioresource Technology, Vol. 129, pp. 512-518

15. Hondakin plastikoen egungo egoera eta kudeaketa: polietilentereftalatoaren birziklapen aukerak

    Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 26, pp. 131-146

16. Improving the DME steam reforming catalyst by alkaline treatment of the HZSM-5 zeolite

    Applied Catalysis B: Environmental, Vol. 130-131, pp. 73-83

17. Influence of CO2-Ar mixtures as shielding gas on laser welding of Al-Mg alloys

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 44, Núm. 13, pp. 5711-5723

18. Influence of the membrane properties on the catalytic production of dimethyl ether with in situ water removal for the successful capture of co2

    Chemical Engineering Journal, Vol. 234, pp. 140-148

19. Influence of the synthesis route on the catalytic oxidation of 1,2-dichloroethane over CeO2/H-ZSM5 catalysts

    Applied Catalysis A: General, Vol. 456, pp. 96-104

20. Kinetic behaviour of catalysts with different CuO-ZnO-Al2O3 metallic function compositions in DME steam reforming in a fluidized bed

    Applied Catalysis B: Environmental, Vol. 142-143, pp. 315-322