Publikationen in Zusammenarbeit mit Forschern von Gorgan University of Agricultural Sciences and Natural Resources (29)

2023

  1. Binderless Self-densified 3 mm-Thick Board Fully Made from (Ligno)cellulose Nanofibers of Paulownia Sawdust

    Waste and Biomass Valorization, Vol. 14, Núm. 9, pp. 2931-2943

  2. Simultaneous/direct chemomechanical densification and downsizing of weak paulownia wood to produce a strong, unidirectional, all-wooden nanocomposite

    Polymer Journal, Vol. 55, Núm. 6, pp. 691-702

2021

  1. Direct conversion of raw wood to TEMPO-oxidized cellulose nanofibers

    Carbohydrate Polymers, Vol. 262

  2. Influence of spherical-shaped carbon nanoparticles on the mechanical properties of a foamed sugarcane bagasse/polypropylene composite

    Industrial Crops and Products, Vol. 172

  3. Pull-out strength of glued-in gfrp rods in timber connections by using of epoxy resin reinforced by nanoparticles

    Cerne, Vol. 27, Núm. 1

  4. Structural health assessment of a historical building by using in situ stress wave ndt: A case study in Iran

    Cerne, Vol. 27, Núm. 1

  5. Structural performance of hybrid Poplar-Beech cross-laminated-timber (CLT)

    Journal of Building Engineering, Vol. 44

2020

  1. Bending and shear properties of cross-laminated timber panels made of poplar (Populus alba)

    Construction and Building Materials, Vol. 265

2017

  1. Effect of glue-line thickness on pull-out behavior of glued-in GFRP rods in LVL: Finite element analysis

    Polymer Testing, Vol. 62, pp. 196-202

  2. Mechanical and Physical Properties of Green Biocomposite Based on Medium Density Fiberboard Sanding Powder/Polyethylene/Nanoclay

    Journal of Polymers and the Environment, Vol. 25, Núm. 2, pp. 221-228

2016

  1. Predicting the static modulus of elasticity in eastern cottonwood (Populus deltoides) using stress wave non-destructive testing in standing trees

    European Journal of Wood and Wood Products, Vol. 74, Núm. 6, pp. 885-892

  2. Species and mechanical strengths of wood members in a historical timber building in Gorgan (North of Iran)

    BioResources, Vol. 11, Núm. 2, pp. 5169-5180

  3. The effect of beverage storage packets (Tetra Pak™) waste on mechanical properties of wood-plastic composites

    Journal of Thermoplastic Composite Materials, Vol. 29, Núm. 12, pp. 1601-1610

2015

  1. Effects of nanoclay and coupling agent on fungal degradation and water absorption of sanding dust/high density polyethylene composites

    Journal of Composite Materials, Vol. 49, Núm. 9, pp. 1107-1114

2014

  1. A comparative study on the effects of material blending method on the physico-mechanical properties of WPCs made from MDF dust

    Journal of Applied Polymer Science, Vol. 131, Núm. 15

  2. MDF dust/PP composites reinforced with nanoclay: Morphology, long-term physical properties and withdrawal strength of fasteners in dry and saturated conditions

    Construction and Building Materials, Vol. 52, pp. 324-330

  3. Properties of wood plastic composite panels made from waste sanding dusts and nanoclay

    Journal of Composite Materials, Vol. 48, Núm. 14, pp. 1661-1669

  4. Wood Plastic Composite Panels: Influence of the Species, Formulation Variables and Blending Process on the Density and Withdrawal Strength of Fasteners

    Journal of Polymers and the Environment, Vol. 22, Núm. 2, pp. 260-266

2013

  1. A comparative study on some properties of wood plastic composites using canola stalk, Paulownia, and nanoclay

    Journal of Applied Polymer Science, Vol. 129, Núm. 3, pp. 1491-1498

  2. Effect of resin content, press time and overlaying on physical and mechanical properties of carton board made from recycled beverage carton and MUF resin

    Life Science Journal, Vol. 10, Núm. SUPPL.4, pp. 613-619