Publikationen, an denen er mitarbeitet JAVIER BILBAO ELORRIAGA (39)

2023

  1. Study on the role of the reaction time in the upcycling of HDPE by co-hydrocracking it with VGO

    Journal of Analytical and Applied Pyrolysis, Vol. 170

2020

  1. Co-cracking of high-density polyethylene (HDPE) and vacuum gasoil (VGO) under refinery conditions

    Chemical Engineering Journal, Vol. 382

  2. Converting the Surplus of Low-Quality Naphtha into More Valuable Products by Feeding It to a Fluid Catalytic Cracking Unit

    Industrial and Engineering Chemistry Research, Vol. 59, Núm. 38, pp. 16868-16875

  3. Taking advantage of the excess of thermal naphthas to enhance the quality of FCC unit products

    Journal of Analytical and Applied Pyrolysis, Vol. 152

2019

  1. Catalytic cracking of raw bio-oil under FCC unit conditions over different zeolite-based catalysts

    Journal of Industrial and Engineering Chemistry, Vol. 78, pp. 372-382

  2. Cracking of Scrap Tires Pyrolysis Oil in a Fluidized Bed Reactor under Catalytic Cracking Unit Conditions. Effects of Operating Conditions

    Energy and Fuels, Vol. 33, Núm. 4, pp. 3133-3143

  3. Enhanced production of phenolics and aromatics from raw bio-oil using HZSM-5 zeolite additives for PtPd/C and NiW/C catalysts

    Applied Catalysis B: Environmental, Vol. 259

2015

  1. Kinetic Modeling of the Hydrotreating and Hydrocracking Stages for Upgrading Scrap Tires Pyrolysis Oil (STPO) toward High-Quality Fuels

    Energy and Fuels, Vol. 29, Núm. 11, pp. 7542-7553

2014

  1. Causes of deactivation of bifunctional catalysts made up of CuO-ZnO-Al 2O3 and desilicated HZSM-5 zeolite in DME steam reforming

    Applied Catalysis A: General, Vol. 483, pp. 76-84

  2. Coke deactivation of Ni and Co catalysts in ethanol steam reforming at mild temperatures in a fluidized bed reactor

    International Journal of Hydrogen Energy, Vol. 39, Núm. 24, pp. 12586-12596

  3. Reaction pathway for ethanol steam reforming on a Ni/SiO2 catalyst including coke formation

    International Journal of Hydrogen Energy, Vol. 39, Núm. 33, pp. 18820-18834

2013

  1. Reply to "A correction on one-dimensional modelling of conical spouted beds", published in Chem. Eng. Process. 48 (2009) 1264-1269

    Chemical Engineering and Processing: Process Intensification

2012

  1. Effect of Temperature in Hydrocracking of Light Cycle Oil on a Noble Metal-Supported Catalyst for Fuel Production

    Chemical Engineering and Technology, Vol. 35, Núm. 4, pp. 653-660

  2. Effect of catalyst acidity on the catalytic cracking of glycerol under FCC conditions

    CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

  3. Effect of space velocity on the hydrocracking of Light Cycle Oil over a Pt-Pd/HY zeolite catalyst

    Fuel Processing Technology, Vol. 95, pp. 8-15

2011

  1. Modelling product distribution of pyrolysis gasoline hydroprocessing on a Pt-Pd/HZSM-5 catalyst

    Chemical Engineering Journal, Vol. 176-177, pp. 302-311

2010

  1. Composition of the products obtained in the cracking of a mixture of atmospheric residue and vacuum gas-oil

    19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7

  2. Glycerol upgrading by catalytic cracking on zeolite catalysts under FCC conditions

    19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7

  3. Intensifying the yield of gasoline and diesel during the hydrocracking of light cycle oil (LCO) on Pt-Pd/acid-support catalyst

    19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7

2009

  1. HZSM-5 zeolite as catalyst additive for residue cracking under FCC conditions

    Energy and Fuels, Vol. 23, Núm. 9, pp. 4215-4223