Publikationen (19) Publikationen von JOSE LUIS ARANA BILBAO

2015

  1. Tribocorrosion behaviour of mooring high strength low alloy steels in synthetic seawater

    Wear, Vol. 338-339, pp. 1-10

2013

  1. Mechanical properties and phases derived from TiO2 nanopowder inoculation in low carbon steel matrix

    Materials Transactions, Vol. 54, Núm. 10, pp. 1867-1876

  2. Optimisation of total roll power using genetic algorithms in a compact strip production plant

    International Journal of Materials Research, Vol. 104, Núm. 7, pp. 686-696

2011

  1. Wettability and mechanical properties assessment of Nano TiO2 and Armco Iron system

    AISTech - Iron and Steel Technology Conference Proceedings

  2. Wetting behavior of sintered nanocrystalline powders by armco Fe and 22CrNiMoV5-3 steel grade using sessile drop wettability technique

    ISIJ International, Vol. 51, Núm. 5, pp. 733-742

2010

  1. Fatigue crack initiation and growth on a steel in the very high cycle regime with sea water corrosion

    Engineering Fracture Mechanics, Vol. 77, Núm. 11, pp. 1953-1962

  2. Laser polishing of tool steel with CO2 laser and high-power diode laser

    International Journal of Machine Tools and Manufacture, Vol. 50, Núm. 1, pp. 115-125

  3. Very high cycle fatigue analysis of high strength steel with corrosion pitting

    Key Engineering Materials

2009

  1. Reinforcement of austenitic manganese steel with (TiMo) carbide particles previously synthesized by SHS

    ISIJ International, Vol. 49, Núm. 4, pp. 582-586

  2. Síntesis autopropagada a alta temperatura (SHS) del "masteralloy" Fe (TiMo)C utilizando ferroaleaciones

    Revista de metalurgia, Vol. 45, Núm. 3, pp. 174-180

2007

  1. Laser polishing of parts built up by selective laser sintering

    International Journal of Machine Tools and Manufacture, Vol. 47, Núm. 12-13, pp. 2040-2050

  2. Model of thermal-fluid flow in the meniscus region during an oscillation cycle

    AISTech - Iron and Steel Technology Conference Proceedings

  3. The effect of ball burnishing on heat-treated steel and Inconel 718 milled surfaces

    International Journal of Advanced Manufacturing Technology, Vol. 32, Núm. 9-10, pp. 958-968

2006

  1. Mathematical modeling of thermal-fluid flow in the meniscus region during an oscillation cycle

    AISTech - Iron and Steel Technology Conference Proceedings

2005

  1. Crack growth in high strength chain steel subjected to fatigue loading in a corrosive environment

    Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE

2004

  1. Materiales metálicos: aleaciones férreas

    Bilbao : Publicaciones-Escuela Superior de Ingenieros, 2004

2002

  1. Improving the surface finish in high speed milling of stamping dies

    Journal of Materials Processing Technology, Vol. 123, Núm. 2, pp. 292-302

  2. Mecánica de fractura

    Bilbao : Universidad del País Vasco, Servicio Editorial = Euskal Herriko Unibertsitatea, Argitalpen Zerbitzua, 2002

1998

  1. Fabricación de acero en horno eléctrico de arco. Evolución del consumo energético (1992-96)

    Revista DYNA, Vol. 73, Núm. 5, pp. 47-51