Publications (25) ANGEL PEREZ MANSO publications

2024

  1. Design and Fabrication of a Manipulative System to Aid in the Understanding of the Fundamentals of the Direct Dihedral System

    Lecture Notes in Mechanical Engineering

2023

  1. Positional influence of center of masticatory forces on occlusal contact forces using a digital occlusal analyzer

    Journal of Prosthetic Dentistry, Vol. 129, Núm. 6, pp. 930.e1-930.e8

2022

  1. A Virtual Sensor for a Cell Voltage Prediction of a Proton-Exchange Membranes Based on Intelligent Techniques

    Lecture Notes in Networks and Systems

2021

  1. Integración y evaluación de una propuesta para la enseñanza del conocimiento estratégico en CAD

    Revista DYNA, Vol. 96, Núm. 2, pp. 145-149

2020

  1. Corrosion behavior of tantalum coatings on AISI 316L stainless steel substrate for bipolar plates of PEM fuel cells

    International Journal of Hydrogen Energy, Vol. 45, Núm. 40, pp. 20679-20691

  2. Evaluation of the corrosion resistance of Ni(P)Cr coatings for bipolar plates by electrochemical impedance spectroscopy

    International Journal of Hydrogen Energy, Vol. 45, Núm. 40, pp. 20632-20646

2019

  1. Single cell induced starvation in a high temperature proton exchange membrane fuel cell stack

    Applied Energy, Vol. 250, pp. 1176-1189

  2. Strategic knowledge-based approach for CAD modelling learning

    International Journal of Technology and Design Education, Vol. 29, Núm. 4, pp. 947-959

2017

  1. Diseño, implementación y evaluación de un modelo de ABP con y sin scaffolding dirigido a alumnos jóvenes y adultos

    Enseñanza de las ciencias: revista de investigación y experiencias didácticas, Núm. 0, pp. 1497-1502

  2. Propuesta de innovación docente en la asignatura de ampliación de diseño industrial: de la metodología tradicional a la aplicación en un proyecto real

    Revista d'innovació docent universitària: RIDU, Núm. 9, pp. 96-103

2015

  1. Electronic modeling of a PEMFC with logarithmic amplifiers

    International Journal of Hydrogen Energy, Vol. 40, Núm. 9, pp. 3708-3718

2013

  1. Developing teamwork efficacy factors: An experience in a Project Based Learning context

    International Journal of Engineering Education, Vol. 29, Núm. 3, pp. 752-762

  2. Developing teamwork efficacy factors: an experience in a project based learning context

    The International journal of engineering education, Vol. 29, Núm. 3, pp. 752-762

2012

  1. Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review

    International Journal of Hydrogen Energy, Vol. 37, Núm. 20, pp. 15256-15287

2011

  1. Numerical analysis of the influence of the channel cross-section aspect ratio on the performance of a PEM fuel cell with serpentine flow field design

    International Journal of Hydrogen Energy, Vol. 36, Núm. 11, pp. 6795-6808

2009

  1. Design optimization of a polymer electolyte membrane fuel cell, PEMFC

    Journal of New Materials for Electrochemical Systems, Vol. 12, Núm. 2-3, pp. 133-137

2008

  1. Determination of trace metal release during corrosion characterization of FeCo-based amorphous metallic materials by stripping voltammetry. New materials for GMI biosensors

    Journal of Non-Crystalline Solids, Vol. 354, Núm. 47-51, pp. 5169-5171

  2. Difusión del software libre en la universidad: la experiencia piloto Moodle en la Universidad del País Vasco

    Educar, Núm. 41, pp. 51-58

2007

  1. Optimization of the microstructure and corrosion resistance of Finemet type alloys in KOH solutions

    Journal of Non-Crystalline Solids, Vol. 353, Núm. 8-10, pp. 875-878

2004

  1. Automatización de procesos para Solid Edge

    Actas del Congreso Internacional de Ingeniería Gráfica XVI