Publications (29) GONZALO MARIA GUERRICA ECHEVARRIA ESTANGA publications

filter_list Polymers and Plastics

2024

  1. Production of supertough and semiconductive PLA-based polymer blend nanocomposites by kinetic microstructural control

    Polymer, Vol. 296

  2. Unlocking superior properties in polypropylene/polyethylene terephthalate (PP/PET) blends using an ethylene-butylene-acrylate terpolymer reactive compatibilizer

    Polymer Testing, Vol. 130

2023

  1. Are ionic liquids effective curing agents for preparing epoxy adhesives?

    International Journal of Adhesion and Adhesives, Vol. 125

  2. Effect of the Simultaneous Addition of Polycaprolactone and Carbon Nanotubes on the Mechanical, Electrical, and Adhesive Properties of Epoxy Resins Cured with Ionic Liquids

    Polymers, Vol. 15, Núm. 7

  3. High-Impact PLA in Compatibilized PLA/PCL Blends: Optimization of Blend Composition and Type and Content of Compatibilizer

    Macromolecular Materials and Engineering, Vol. 308, Núm. 12

2022

  1. Effect of compatibilizer addition on the surface nucleation of dispersed polyethylene droplets in a self-nucleated polypropylene matrix

    Polymer, Vol. 263

  2. Improving the Mechanical Performance of LDPE/PP Blends through Microfibrillation

    ACS Applied Polymer Materials, Vol. 4, Núm. 5, pp. 3369-3379

  3. Improving the Mechanical Performance of LDPE/PP Blends through Microfibrillation

    ACS APPLIED POLYMER MATERIALS, Vol. 4, Núm. 5, pp. 3369-3379

  4. Improving the Mechanical Performance of LDPE/PP Blends through Microfibrillation

    ACS APPLIED POLYMER MATERIALS, Vol. 4, Núm. 5, pp. 3369-3379

  5. Ionic Liquid-Cured Epoxy/PCL Blends with Improved Toughness and Adhesive Properties

    Polymers, Vol. 14, Núm. 13

2021

  1. Synthesis, structure, crystallization and mechanical properties of isodimorphic PBS-ran-PCL copolyesters

    Polymers, Vol. 13, Núm. 14

2019

  1. The effect of the preparation method and the dispersion and aspect ratio of cnts on the mechanical and electrical properties of bio-based polyamide-4,10/CNT nanocomposites

    Polymers, Vol. 11, Núm. 12

2018

  1. Novel biobased polyamide 410/polyamide 6/CNT nanocomposites

    Polymers, Vol. 10, Núm. 9

  2. The effects of the location of organoclay on the structure and mechanical properties of compatibilized polypropylene/polyamide-12 ternary nanocomposites

    Polymer Engineering and Science, Vol. 58, Núm. 6, pp. 830-838

2017

  1. CNT-induced morphology and its effect on properties in PLA/PBAT-based nanocomposites

    European Polymer Journal, Vol. 93, pp. 545-555

  2. Morphology and properties of electrically and rheologically percolated PLA/PCL/CNT nanocomposites

    Journal of Applied Polymer Science, Vol. 134, Núm. 36

2015

  1. Melt processed PLA/PCL blends: Effect of processing method on phase structure, morphology, and mechanical properties

    Journal of Applied Polymer Science, Vol. 132, Núm. 41

2009

  1. Structure and mechanical properties of impact modified poly(butylene terephthalate)/poly(ethylene terephthalate) blends

    Polymer Engineering and Science

2007

  1. Influence of compatibilization on the mechanical behavior of poly(trimethylene terephthalate)/poly(ethylene-octene) blends

    European Polymer Journal, Vol. 43, Núm. 3, pp. 1027-1037

2006

  1. Structure and mechanical properties of compatibilized poly(ethylene terephthalate)/poly(ethylene octene) blends

    Polymer Engineering and Science, Vol. 46, Núm. 2, pp. 172-180