Publikationen, an denen er mitarbeitet JOSEBA ALBIZURI IRIGOYEN (13)

2021

  1. A new approach in the design of microstructured ultralight components to achieve maximum functional performance

    Materials, Vol. 14, Núm. 7

2016

  1. Influence of the WEDM process on the fatigue behavior of Inconel® 718

    International Journal of Fatigue, Vol. 92, pp. 220-233

2014

  1. Influence of laser polishing in an inert atmosphere on the high cycle fatigue strength of AISI 1045 steel

    International Journal of Fatigue, Vol. 68, pp. 67-79

  2. On the fatigue strength of ball burnished mechanical elements

    Mechanisms and Machine Science, Vol. 17, pp. 365-373

2013

  1. Influence of low-plasticity ball burnishing on the high-cycle fatigue strength of medium carbon AISI 1045 steel

    International Journal of Fatigue, Vol. 55, pp. 230-244

2012

  1. Surface improvement of shafts by the deep ball-burnishing technique

    Surface and Coatings Technology, Vol. 206, Núm. 11-12, pp. 2817-2824

2011

  1. Influence of laser polishing on the high cycle fatigue strength of medium carbon AISI 1045 steel

    International Journal of Fatigue, Vol. 33, Núm. 11, pp. 1477-1489

2009

  1. Burnishing of rotatory parts to improve surface quality

    AIP Conference Proceedings

2008

  1. Experimental and numerical study of angular error in wire-EDM taper-cutting

    International Journal of Machine Tools and Manufacture, Vol. 48, Núm. 12-13, pp. 1420-1428

  2. Medición y modelizado de la flexibilidad estática de una fresadora de ultraprecisión con herramientas de diámetro inferior a 0.3 mm

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 345, pp. 55-63

2007

  1. Balance de incertidumbre y evaluación de la cadena de rigidez de una microfresadora dotada de herramientas de diámetro inferior a 0,3 mm

    Revista iberoamericana de ingeniería mecánica, Vol. 11, Núm. 1, pp. 13-36

  2. Error budget and stiffness chain assessment in a micromilling machine equipped with tools less than 0.3 mm in diameter

    Precision Engineering, Vol. 31, Núm. 1, pp. 1-12

2006

  1. Tool wear in micro-milling: Experimental comparison of coatings

    Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006