Modelling and advanced control design of three-phase electrical machines

  1. SHIRAVANI, FAHIMEH
Dirigida por:
  1. Patxi Alkorta Egiguren Director/a
  2. Jose Antonio Cortajarena Echeverria Director/a

Universidad de defensa: Universidad del País Vasco - Euskal Herriko Unibertsitatea

Fecha de defensa: 08 de septiembre de 2023

Departamento:
  1. Ingeniería de Sistemas y Automática

Tipo: Tesis

Teseo: 822317 DIALNET lock_openADDI editor

Resumen

The main objective of this thesis is to control the electrical three-phase AC machines, using advanced control methods to meet the performance requirements for the plant model. Throughout this thesis, four different electrical three-phase AC machines were employed as motors or generators: the Squirrel Cage Induction Machine (SCIM), Doubly Fed Induction Machine (DFIM), Permanent Magnet Synchronous Machine (PMSM), and Permanent Magnet Vernier Machine (PMVM). When these machines are working as motors or generators, their shaft is mechanically connected to a load. In the generator regimen, two different turbine types were considered: the Wells turbine in Oscillating Water Column (OWC) and Wind Turbine System (WTS).In this thesis, different control techniques are proposed to govern different aspects of the machine. The Integral Sliding Mode Control (ISMC) and Finite Control Set-Model Predictive Control (FCS-MPC) are employed for the current regulation of electrical machines. For velocity regulation, various methods such as the ISMC method, Generalized Predictive Control (GPC) technique, and a GPC-based Proportional Integral (PI) approach were proposed. Three different GPC schemes were implemented: nonlinear, analytical, and industrial, each offering different features.